Dell Latitude D610 and Handphone MyG 800

My new 3 day use ubuntu 8.04 (Hardy Heron) and trying to configure the Dell Latitude D610 with MyG 800 mobile phone using the USB cable to connect to the internet. The many references in Ubuntu is very easy for this process. Here are the contents of /etc/wvdial.conf to connect Dell and MyG using XL as a provider :

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”www.xlgprs.net”,”202.152.240.050″,0,0
Modem Type = Analog Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Stupid Mode = 1
Phone = *99#
Password = proxl
Username = xlgprs

and below is the view after I run wvdial

root@KeluargaRuliyanto:/etc# wvdial
–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
–> Sending: AT+CGDCONT=1,”IP”,”www.xlgprs.net”,”202.152.240.050″,0,0
AT+CGDCONT=1,”IP”,”www.xlgprs.net”,”202.152.240.050″,0,0
OK
–> Modem initialized.
–> Sending: ATDT*99#
–> Waiting for carrier.
ATDT*99#
CONNECT
~[7f]}#@!}!} } }2}”}&} } } } }#}$@#}’}”}(}”R[04]~
–> Carrier detected. Starting PPP immediately.
–> Starting pppd at Sun Jun 29 00:55:05 2008
–> Pid of pppd: 10622
–> Using interface ppp0
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> local IP address 172.26.36.11
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> remote IP address 10.64.64.64
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> primary DNS address 202.152.254.245
–> pppd: ��[06][08][18]�[06][08]ا[06][08]
–> secondary DNS address 202.152.254.246
–> pppd: ��[06][08][18]�[06][08]ا[06][08]

translate : ubuntulinux.or.id

Install Driver Prolink Modem

Install Driver Prolink Modem (Ubuntu 7.04)

1. Download ungrab_winmodem (Version 2.9.11-20070813)

2. Download slmodem (Version 20070505)
3. Install libstdc++6-4.1-dev
4. Extract ungrab_winmodem
5. Change Directory into ungrab_winmodem directory as root
6. Type make press Enter
7. Type make install press Enter
8. Type modprobe ungrab-winmodem press Enter
9. Extract slmodem
10. Change Directory into slmodem
11. Type make press Enter
12. Type make install press Enter
13. Type modprobe slamr press Enter
14. Type ln -s /dev/ttySL0 /dev/modem
15. Install KPPP
16. Enjoy